Loading ...
Loading ...
Loading ...
Installation
68
5 Installation
5.1 Electrical connection
General information
Make sure that the mains electricity supply
is the same as that indicated on the
identification plate.
The identification plate with the technical
data, serial number and brand name is
located in an easily visible position on the
appliance.
Do not remove this plate for any reason.
The appliance operates at 220-240 V~.
Use a three-core cable (3 x 1.5 mm
2
internal conductors).
Make the earth connection using a wire
that is 20 mm longer than the other wires.
Fixed connection
Install an omnipolar circuit breaker on the
power supply line in compliance with
installation regulations.
The circuit breaker should be located near
to the appliance and in an easily accessible
position.
Connection with plug and socket
Make sure that the plug and socket are of
the same type.
Avoid using adapters or gang sockets as
these could cause overheating or burns.
Electrical hazard
Electrocution hazard
• The electrical connection should be
carried out by qualified technical
personnel.
• The appliance must be earthed in
compliance with electrical safety
standards.
• Disconnect the mains power supply.
Loading ...
Loading ...
Loading ...