Loading ...
Loading ...
Loading ...
Cleaning and maintenance
67
EN
The indicator light flashes and the
appliance has not sealed the bag after a
vacuum level 3 bag sealing cycle or the
indicator light flashes after a vacuum
level 2 bag sealing cycle or after a vacuum
level 3 sealing cycle for containers or the
indicator light turns on:
• The appliance warns you that the
product is too hot and / or that the bag
is too full.
Reset the alarm and press the select
cycle button.
Cool the product to 3°C and/or reduce
the amount of food in the bag and start a
new cycle if the previous cycle had not
been completed.
The indicator light turns on and the
appliance emits a beep.
• The lid has not been lowered or has not
been pressed against the chamber.
Close the lid; press it slightly in order to
start a new cycle.
• The vacuum adapter has not been
connected correctly.
Connect the adapter and start a new
cycle.
• Substantial loss of vacuum.
A pipe may have become detached.
Contact the technical assistance service.
The indicator light switches on and the
indicator light of the ON/OFF button
flashes:
• Excessive number of cycles carried out,
causing the oil in the pump to overheat.
• Allow the vacuum drawer to cool down
for at least 1 hour.
The indicator light turns on and the
appliance emits a beep:
• Absolute vacuum sensor fault.
Contact the technical assistance service.
If the problem persists, or for other
types of fault, contact your local
technical support centre.
Loading ...
Loading ...
Loading ...