Loading ...
Loading ...
Loading ...
INITIAL SETUP
5 - 2
MFC3200C-US-FM6.0
Setting Date and Time
Your MFC displays the date and time, and prints it on every fax you send.
In the event of a power failure, you may have to reset the date and time. All other
settings remain unaffected.
1
Press
Menu/Set
,
1
,
3
.
2
Enter the last two digits of the year,
and then press
Menu/Set
.
3
Enter two digits for the month (for
example, enter 09 for September, or 10
for October), and then press
Menu/Set
.
4
Enter two digits for the day (for example,
06), and then press
Menu/Set
.
5
Enter the time in 24-hour format (for
example, enter 15:25 for 3:25 P.M.),
and then press
Menu/Set
.
6
Press
Stop/Exit
.
The LCD now displays the date and time you set whenever the MFC is in
Standby mode.
Setting Station ID
You can store your name, fax number and telephone number in this setting. The
name and fax number will be printed on the fax cover pages and all fax pages
that you send.
1
Press
Menu/Set
,
1
,
4
.
2
Enter your fax number (up to 20 digits),
and then press
Menu/Set
.
You must enter a fax number to proceed.
3
Enter your telephone number (up to 20
digits) and press
Menu/Set
. If your
telephone number and fax number are the
same, enter the same number again.
4
Use the dial pad to enter your name (up to
20 characters), and then press
Menu/Set
. (See
Entering Text
, page 5-3.)
5
Press
Stop/Exit
.
The LCD returns to the date and time.
The telephone number you enter is used only for Cover Page features.
(See
Composing Electronic Cover Page
, page 7-7.)
If your Station ID has already been programmed, the LCD prompts
1
to make
a change, or
2
to exit without changing.
3.DATE/TIME
YEAR:XX
MONTH:XX
DAY:XX
TIME:XX:XX
4.STATION ID
FAX:
TEL:
NAME:
Loading ...
Loading ...
Loading ...