Loading ...
Loading ...
Loading ...
2 - 13
ASSEMBLY AND CONNECTIONS
MFC3200C-US-FM6.0
Connecting the MFC
Connecting an External Telephone
Although your MFC has a handset, you can connect a separate telephone (or
telephone answering device) directly to your MFC.
Connect the modular plug on the telephone’s line cord to the jack labeled EXT.
on the back side of the MFC.
Whenever this phone (or TAD) is in use, the LCD displays
EXT. TEL IN USE
,
and, if the fax handset is lifted, an alarm sounds. To disconnect the call on the
external phone and switch to the fax, press
Hook/Hold
.
Connecting an External Telephone
Answering Device (TAD)
Sequence
You may choose to connect an answering device. However, when you have an
external
TAD on the same telephone line as the MFC, the TAD answers all
calls. The MFC “listens” for fax calling (CNG) tones. If it hears them, the MFC
takes over the call and receives the fax. If it doesn’t hear CNG tones, the MFC
lets the TAD continue playing your outgoing message so your caller can leave
you a voice message.
The TAD must answer within five rings (the recommended setting is two rings).
The MFC cannot hear CNG tones until the TAD has answered the call, and with
five rings there are only 8–10 seconds of CNG tones left for the fax
“handshake”. Make sure you carefully follow instructions in this manual for
recording your outgoing message. We do not recommend using the toll saver
feature on your external answering machine if it exceeds five rings.
The external telephone can be cordless. Set the Receive Mode to
FAX/TEL.
(See
Using a Cordless External Handset
, page 6-5.)
If you do not receive all your faxes, you must reset the setting on your external
TAD to four rings or less.
The external TAD can be cordless. Set the Receive Mode to
TAD:ANSWER
MACH.
.
If You Subscribe to your Telephone Company’s Distinctive Ring Service:
You may connect an external TAD to a separate wall jack
only
if you subscribe
to your telephone company’s Distinctive Ring service, have registered the
distinctive ring pattern on your MFC, use that number as a fax number, and
have set your machine’s Receive mode to
MANUAL
. The recommended
setting is three or four rings on the external TAD when you have the telephone
company’s Distinctive Ring Service.
Loading ...
Loading ...
Loading ...