Loading ...
Loading ...
Loading ...
Electrical connection
108
A
TTENTION:
Before installation or servicing, dis‐
connect the power supply by either
r
emoving the fuse, manually "trip‐
ping" the circuit breaker or unplug‐
ging the appliance. Pull the plug not
the cord.
Installation work and repairs should
on
ly be performed by a qualified
technician in accordance with all ap‐
plicable codes and standards. Re‐
pairs and service by unqualified per‐
sons could be dangerous and the
manufacturer will not be held re‐
sponsible. Installation, repair, and
maintenance work should only be
performed by a Miele-authorized
service technician. Work by unquali‐
fied persons can cause considerable
danger to users. Miele cannot be
held liable for any damage arising as
a result of such work.
Before connecting the appliance to
the power supply, mak
e sure that the
voltage and frequency listed on the
rating label correspond with the
household electrical supply. This da‐
ta must correspond to prevent appli‐
ance damage.
Consult an electrician if in doubt.
For safety reasons, the steam oven
may only be used when it has been
fully installed.
Installer:
Please leave these instructions with
the cust
omer.
Connection
Ensu
re that the connection data on
the data plate (voltage, frequency,
and fuse rating) match those of your
electrical supply.
Power Supply
This appliance is equipped with a 5 ft
(1.5 m)
long power cord with a NEMA
6-20P three-prong grounding plug
ready for connection.
208/240 V / 20 A / 60 Hz
Make sure that the connecting socket is
accessi
ble after the installation of the
steam oven.
Loading ...
Loading ...
Loading ...