Loading ...
Loading ...
Loading ...
38
Camera
Camera preferences enable you to select camera options, both in photo and video modes.
- Camera calibration Tap “CALIBRATE” to access “Correct horizon”, “Gimbal
Calibration” & “Cameras alignment” features.
- Auto record from take-off NO/ YES (video only)
- Lossless zoom only NO / YES (selecting “YES” blocks zoom in JPEG RECT)
- Display overexposure NO / YES
- Anti-flickering OFF / AUTO / 50Hz / 60 Hz
About Correct horizon: only resort to the “Correct horizon” procedure if you notice your videos
and photos are systematically tilted on the same side. Refer to the “
Camera calibration
”
section of this guide for the detailed procedure.
About Cameras alignment: only resort to the “Cameras alignment” procedure if you notice
the thermal and visible images of your Thermal are misaligned. Refer to the “
Camera
calibration
” section of this guide for the detailed procedure.
About Overexposure display: when this setting is activated, the HUD of FreeFlight 6 shows all
overexposed areas of the screen as hatched, which enables you to fine-tune your framing,
your EV settings, or both.
About Anti-flickering: this setting and the associated technology aim at eliminating the flicker
effect which can arise due to some artificial lights. The “AUTO” option should work for most
users, but depending on your country, you can try other settings if you feel bothered by a
flicker effect on your device’s screen, your artificial light videos, or both.
Tap “RESET ALL CAMERA PREFERENCES AND SETTINGS” on the bottom of the page to reset
preferences.
Network
Network preferences let you change your Thermal’s Wi-Fi network name, password,
and band.
- Network’s name Tap the field to change your Thermal’s network name
- Password Tap the box to change your network’s password
- Wi-Fi band AUTO / MANUAL
Loading ...
Loading ...
Loading ...