Loading ...
Loading ...
Loading ...
User Guide v3.6 –
published on October 23, 2019
25
Thermal’s smart LiPo battery is preinstalled on the drone and should always be
reinstalled in the same way, with the LEDs and power button facing up, to avoid
irrecoverable electric damage to the battery, to the drone, or to both.
The smart battery can be charged whether it is installed on Thermal or not. However,
you will need to remove the battery from the drone to access your microSD card. Refer to
the
“Retrieving media”
section of this guide for further information.
When handling Thermal, you should never apply pressure and generally avoid
touching the drone’s camera and gimbal – its most sensitive parts. The following
directions will help you handle your drone and battery safely.
Battery removal
To remove the smart battery from the drone, unfold the back arms of Thermal.
Set the drone on a flat and even surface (such as a table), and press the push-button
which connects the battery to the body of the drone with your thumb. Gently slide
your thumb and the battery toward the back of Thermal. When the hook of
the push-button is disengaged from the body of the drone, lift the battery away from
Thermal.
Thermal: battery removal
Loading ...
Loading ...
Loading ...