Loading ...
Loading ...
Loading ...
The window closes automatically if the
door is closed. Pulling the switch again
stops the motion.
Convenient closing with the vehicle key, re-
fer to page 64.
Closing via Comfort Access, refer to
page 69.
Jam protection system
Concept
The jam protection prevents objects or body
parts becoming jammed between the door
frame and window while a window is being
closed.
General information
If resistance or a blockage is detected while
a window is being closed, the closing action
is interrupted.
The window opens slightly.
Safety information
Warning
Accessories on the windows such as an-
tennas can impact jam protection. There is
a risk of injury. Do not install accessories
in the area of movement of the windows.
Closing without the jam protection
system
In case of danger from the outside or if ice
might prevent normal closing, proceed as
follows:
1. Pull the switch past the resistance
point and hold it there.
The window closes with limited jam pro-
tection. If the closing force exceeds a
specific threshold, closing is inter-
rupted.
2. Pull the switch past the resistance
point again within approx. 4 seconds
and hold it there.
The window closes without jam protec-
tion.
On 5-door models: safety switch
General information
The safety switch can be used to prevent
children, for instance from opening and
closing the rear windows using the
switches in the rear.
If an accident of a certain severity occurs,
the safety function is switched off automati-
cally.
Switching on/off
Press the button.
The LED lights up if the safety func-
tion is switched on.
Malfunction
General information
In certain situations a window can only be
operated to a limited extent.
– After a power failure during the opening
or closing process, the a window can
only be operated to a limited extent. The
system must be initialized in this case.
– The power window motors are equipped
with overheating protection. If a win-
dow is opened and closed several times
within a short period of time, the over-
heating protection switches the motor
off temporarily. Depending on the de-
gree of overheating, it may only be pos-
sible to close the window or it may not
be possible to operate it at all.
In this case: allow the power window
motor to cool down.
Seite 78
CONTROLS Opening and closing
78
Online Edition for Part no. 01405A1E4E3 - II/20
Loading ...
Loading ...
Loading ...