Loading ...
Loading ...
Loading ...
Switching off
Press the button on the steering
wheel.
The displays go out. The stored desired
speed is deleted.
Interrupting manually
Press the button on the steering
wheel.
Interrupting automatically
The system is automatically interrupted in
the following situations:
– When the driver applies the brakes.
– Manual transmission: when the clutch
pedal is depressed for a few seconds or
released while a gear is not engaged.
– If selector lever position N is set.
– Dynamic Traction Control DTC is acti-
vated or DSC Dynamic Stability Control
is deactivated.
– John Cooper Works GP: when GP MODE
is activated or DSC Dynamic Stability
Control is deactivated.
– If DSC Dynamic Stability Control inter-
venes.
– If the detection range of the camera is
impaired, for instance by soiling, heavy
precipitation or glare effects from the
sun.
– If the vehicle in front decelerates below
a speed of approx. 20 mph/30 km/h.
Setting the speed
Maintaining/storing the speed
Press or button in the interrupted
state.
When the system is switched on, the cur-
rent speed is maintained and stored as the
desired speed.
Instrument cluster without enhanced
features:
The stored speed is displayed by the
symbol in the Info Display of the instrument
cluster.
Instrument cluster with en-
hanced features:
The stored speed is displayed.
DSC Dynamic Stability Control is switched
on, if necessary.
The speed can also be stored as follows:
Press the button.
Changing the speed
or button: press until the desired
speed is set.
If active, the displayed speed is stored and
the vehicle reaches the stored speed when
the road is clear.
– or button: each time it is pressed
to the point of resistance, the desired
speed increases or decreases by approx.
1 mph/1 km/h.
– or button: each time it is pressed
past the resistance point, the desired
speed changes by a maximum of 5 mph/
10 km/h.
or button: hold down to repeat the
action.
Seite 180
CONTROLS Driving comfort
180
Online Edition for Part no. 01405A1E4E3 - II/20
Loading ...
Loading ...
Loading ...