Loading ...
Loading ...
Loading ...
General information
The system can limit the speed, starting at a
value of 20 mph/30 km/h. The vehicle can
be driven at any speed below the set speed
limit.
Exceeding the speed limit
When necessary, the speed limit can be in-
tentionally overcome by stepping on the
gas.
When the vehicle speed exceeds the set
speed limit, a warning is issued.
No brake intervention
If the set speed limit is reached or uninten-
tionally exceeded, such as when driving
downhill, the vehicle is not actively braked.
When the speed limit is set during a trip to
a value below the current speed, the vehicle
coasts until its speed drops below the set
speed limit.
Overview
Steering wheel buttons, left
Button Function
System on/off.
Increase the speed limit.
Reduce the speed limit.
Operation
Switching on
Press the button on the steering
wheel.
The current speed is accepted as the speed
limit.
If the system is switched on while the vehi-
cle is stationary or driving at low speeds,
20 mph/30 km/h is set as the speed limit.
The set speed is displayed under the LIMIT
or LIM indicator.
When the speed limit is switched on, DSC
Dynamic Stability Control is switched on as
well, if needed.
Switching off
Press the button on the steering
wheel.
The system switches off automatically in
the following situations, for example:
– When shifting into reverse gear.
– When the engine is switched off.
– When cruise control is switched on.
– John Cooper Works GP: when activating
GP MODE or deactivating DSC.
The displays go out.
Changing the speed limit
or button: press up or down repeat-
edly until the desired speed limit is set.
– or button: each time it is pressed
to the resistance point, the speed limit
increases or decreases by 1 mph,
1 km/h.
– or button: each time it is pressed
past the resistance point, the desired
speed changes by a maximum of 5 mph/
10 km/h.
When the speed limit is set during a trip to
a value below the current speed, the vehicle
coasts until it drops to the set speed limit.
Exceeding the speed limit
The speed limit can be exceeded intention-
ally. There is no acoustic warning in this
case.
Seite 169
Safety CONTROLS
169
Online Edition for Part no. 01405A1E4E3 - II/20
Loading ...
Loading ...
Loading ...