Loading ...
Loading ...
Loading ...
Therefore, a distance of 4 in/10 cm must be
maintained in every direction when operat-
ing the device.
Mounting position of the product.
Safety information
Warning
When charging a device that meets the Qi
standard in the wireless charging tray, any
metal objects located between the device
and the tray can become very hot. Placing
storage devices or electronic cards, such
as chip cards, cards with magnetic strips
or cards for signal transmission, between
the device and the tray may impair the
card function. There is a risk of injury and
risk of damage to property. When charg-
ing mobile devices, make sure there are no
objects between the device and the tray.
NOTICE
The tray is intended for mobile phones up
to a particular size. Forceful inserting of
the mobile phone into the tray can damage
the tray or the mobile phone. There is a
risk of damage to property. Observe the
maximum dimensions for mobile phones.
Do not force the mobile phone into the
tray.
Functional requirements
– Ignition or standby state is switched on.
– The mobile phone must compatibly sup-
port the required Qi standard. Compati-
ble mobile phones, refer to page 53.
If the mobile phone does not support the
Qi standard, the mobile phone can be
charged using a special Qi-compatible
charging case.
– Use only protective jackets and covers
up to a maximum thickness of
0.07 in/2 mm. Otherwise, the charging
function may be impaired.
– The mobile phone must not exceed the
maximum size of approximately 5.9 x
3.07 x 0.62 in/150 x 78 x 16 mm.
Overview
The wireless charging tray is located in the
center armrest.
1 Front holder with LED
2 Storage area
3 Movable clamp
Inserting the mobile phone
1. Open center armrest, refer to vehicle
Owner's Manual.
2. Push back the clamp.
Seite 216
CONTROLS Interior equipment
216
Online Edition for Part no. 01405A1E4E3 - II/20
Loading ...
Loading ...
Loading ...