Loading ...
Loading ...
Loading ...
Cornering
When the desired speed is too high for a
curve, the speed is reduced slightly. Be-
cause curves may not be anticipated in ad-
vance, drive into a curve at an appropriate
speed.
The system has a limited detection range.
Situations can arise in tight curves where a
vehicle driving ahead will not be detected
or will be detected very late.
When you approach a curve the system may
briefly report vehicles in the next lane due
to the bend of the curve. If the system de-
celerates you may compensate it by briefly
accelerating. After releasing the accelerator
pedal the system is reactivated and controls
speed independently.
Weather
The following restrictions can occur under
unfavorable weather or light conditions:
– Poorer vehicle recognition.
– Short-term interruptions for vehicles
that are already recognized.
Examples of unfavorable weather or light
conditions:
– Wet conditions.
– Snowfall.
– Slush.
– Fog.
– Glare.
Drive attentively, and react to the current
traffic situation. If necessary, intervene ac-
tively, for instance by braking, steering or
evading.
Engine power
The desired speed may not be maintained
on uphill grades if engine power is insuffi-
cient.
Malfunction
A Check Control message is displayed if the
system fails or was automatically deacti-
vated.
The system may not be fully functional in
the following situations:
– When an object was not correctly de-
tected.
– In heavy fog, wet conditions, or snow-
fall.
– In tight curves.
– If the field of view of the camera or the
windshield is dirty or covered.
– When driving toward bright lights.
– Up to 20 seconds after the start of the
engine, via the Start/Stop button.
– During calibration of the camera imme-
diately after vehicle delivery.
Seite 184
CONTROLS Driving comfort
184
Online Edition for Part no. 01405A1E4E3 - II/20
Loading ...
Loading ...
Loading ...