Loading ...
Loading ...
Loading ...
Transmission with a tap-operated
selector lever
The selector lever positions R, N, and D are
selected by tapping the selector lever for-
ward or back. The selector lever automati-
cally returns to the center position when re-
leased.
The selector lever position P is engaged by
pressing the P button on the selector lever
or, in certain situations, automatically, refer
to page 115.
Selector lever positions
Drive mode D
Selector lever position for normal vehicle
operation. All gears for forward travel are
activated automatically.
R is reverse
Engage selector lever position R only when
the vehicle is stationary.
Neutral N
The vehicle may be pushed or roll without
engine power in selector lever position N,
for instance in vehicle washes, refer to
page 117.
Parking position P
General information
Selector lever position, for instance for
parking the vehicle.
The transmission blocks the drive wheels in
selector lever position P.
Engage selector lever position P only when
the vehicle is stationary.
Before exiting the vehicle, make sure that
selector lever position P is set. Otherwise,
the vehicle may begin to move.
Automatic parking position for a
transmission with a tap-operated selector
lever
Selector lever position P is engaged auto-
matically in situations such as the follow-
ing:
– After the engine is switched off when
the vehicle is in the radio-ready state,
refer to page 99, or when the ignition is
switched off, refer to page 98, while se-
lector lever position R, D or M/S is en-
gaged.
– If the driver's safety belt is unbuckled,
the driver's door is opened, and the
brake pedal is not pressed while the ve-
hicle is stationary and selector lever po-
sition D, M/S or R is engaged.
– After the ignition has been switched off
while selector lever position N is en-
gaged.
Engaging selector lever positions:
with a latching selector lever
General information
To prevent the vehicle from creeping after
you select a drive mode, maintain pressure
on the brake pedal until you are ready to
start.
Functional requirements
The selector lever can only be taken out of
selector lever position P if the ignition is on
or the engine is running.
Seite 115
Driving CONTROLS
115
Online Edition for Part no. 01405A1E4E3 - II/20
Loading ...
Loading ...
Loading ...