Loading ...
Loading ...
Loading ...
Adjustment
1. Stop at a suitable location.
2. Screw the connection hose of the com-
pressor directly onto the tire valve stem.
3. Insert the connector into the power
socket inside the vehicle.
4. Correct the tire inflation pressure to at
least 2.0 bar.
– Increase tire inflation pressure: with
the ignition switched on or the en-
gine running, switch on the com-
pressor.
– Reduce tire inflation pressure: press
the button on the compressor.
5. Unscrew the connection hose of the
compressor from the tire valve.
6. Pull the connector out of the power
socket inside the vehicle.
7. Stow the Mobility System in the vehicle.
Continuing the trip
Do not exceed the maximum permissible
speed of 50 mph/80 km/h.
Reinitialize the Flat Tire Monitor, refer to
page 159.
Reset the Tire Pressure Monitor, refer to
page 154.
Replace the nonworking tire and the sealant
container of the Mobility System promptly.
Snow chains
General information
The manufacturer of the vehicle has deter-
mined certain wheels and tires to be suita-
ble for operation on the vehicle.
Follow the snow chain manufacturer's in-
structions.
Do not initialize the Flat Tire Monitor after
mounting snow chains, as doing so may re-
sult in incorrect readings.
Do not reset the Tire Pressure Monitor TPM
after mounting snow chains, as doing so
may result in incorrect readings.
When driving with snow chains, briefly ac-
tivate Dynamic Traction Control DTC, if
needed.
Safety information
Warning
With the mounting of snow chains on un-
suitable tires, the snow chains can come
into contact with vehicle parts. There may
be a risk of accident or risk of damage to
property. Only mount snow chains on tires
that are designated by their manufacturer
as suitable for the use of snow chains.
Seite 265
Wheels and tires MOBILITY
265
Online Edition for Part no. 01405A1E4E3 - II/20
Loading ...
Loading ...
Loading ...