Loading ...
Loading ...
Loading ...
Checking and adjusting the tire
inflation pressure
Checking
1. Switch off the compressor.
2. Read the tire inflation pressure on the
tire pressure gage.
To continue the trip, a tire inflation pres-
sure of at least 2 bar must be reached.
Removing and stowing the sealant
container
1. Unscrew the filling hose of the sealant
container from the tire valve.
2. Press the red unlocking device.
3. Remove the sealant container from the
compressor.
4. Wrap and store the sealant container in
suitable material to avoid dirtying the
cargo area.
Minimum tire inflation pressure is not
reached
1. Pull the connector out of the power
socket inside the vehicle.
2. Drive 33 ft/10 m forward and back to
distribute the sealant in the tire.
3. Screw the connection hose of the com-
pressor directly onto the tire valve stem.
4. Insert the connector into the power
socket inside the vehicle.
5. With the ignition switched on or the en-
gine running, switch on the compressor.
If a tire inflation pressure of at least
2 bar cannot be reached, contact your
dealer's service center or another quali-
fied service center or repair shop.
If a tire inflation pressure of at least
2 bar is reached, see Minimum tire infla-
tion pressure is reached.
6. Unscrew the connection hose of the
compressor from the tire valve.
7. Pull the connector out of the power
socket inside the vehicle.
8. Stow the Mobility System in the vehicle.
Minimum tire inflation pressure is
reached
1. Unscrew the connection hose of the
compressor from the tire valve.
2. Pull the connector out of the power
socket inside the vehicle.
3. Stow the Mobility System in the vehicle.
4. Immediately drive approx.
5 miles/10 km to ensure that the sealant
is evenly distributed in the tire.
Do not exceed a speed of
50 mph/80 km/h.
If possible, do not drive at speeds less
than 12 mph/20 km/h.
Seite 264
MOBILITY Wheels and tires
264
Online Edition for Part no. 01405A1E4E3 - II/20
Loading ...
Loading ...
Loading ...