Loading ...
Loading ...
Loading ...
9 - English
Find the speaker cable that is attached to the
Stand. Turn the Stand and Stand Base upside-
down, unravel the speaker cable, and then draw it
through the hole in the Stand Base.
✎
Handle the Stand carefully. It is heavy.
Connect the Stand Base to the bottom of the
Stand.
Insert three 5x20 screws into the marked holes
in the Stand Base, and then tighten them with a
screwdriver as shown in the illustration.
Place the speaker cable into the slot on the bottom
of the stand base.
Connect the assembled stand and a speaker
together by matching the labels on the stand and
speaker with each other as shown in the picture.
Insert a screw (5x20) into the hole on the rear of the
speaker and tighten by turning it clockwise with a
screwdriver.
Repeat steps 1 through 6 with the other speaker
and stand.
Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each
bundle to the coloured sticker on the bottom or back of each speaker.
Connect the speaker wire plugs from each speaker to the back of the product by matching the colours of
the speaker plugs to the colours of the speaker jacks.
5 6
Speaker
Stand
Stand Base
Stand
Loading ...
Loading ...
Loading ...