Loading ...
Loading ...
Loading ...
22 - English
Settings
✎
You can get the network parameter values from
your Internet provider.
When finished entering all the parameter values,
select , and then press the button. The
home cinema verifies the network connection
and then connects to the network.
You can set up a wireless network connection in three
ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
Before you configure the wireless network
connection, disconnect any wireless network devices
currently connected to the product or, if applicable,
the product's current wired connection.
Ğ
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 21:
In the screen, change
to . The product
searches for and then displays a list of the
available networks.
Select the desired network, and then press the
button.
On the Security screen, enter your network's
security code or pass phrase.
Enter letters by selecting a letter with
,.
buttons, and then pressing button.
When finished, select , and then press the
button. The product verifies the network
connection and then connects to the network.
✎
You should be able to find the security code or
pass phrase on one of the set up screens you
used to set up your router or modem.
Ğ
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 21:
In the screen, change
to . The product
searches for and then displays a list of the
available networks.
Scroll through the list, select the desired network
or , and then press the button.
If you selected a network in Step 2, go to Step 6.
If you selected , go to Step 4.
Enter your wireless network or wireless router's
name.
Enter letters by selecting a letter with the
,.
buttons, and then pressing the
button.
To display capital letters (or redisplay lower
case letters if capital letters are displayed),
select
, and then press the button.
To display symbols and punctuation, select
, and then press the button. To
redisplay letters, select , and then press
the button.
When finished, select , and then press the
button.
On the screen that appears,
use the
,.
buttons to select the network's
, and then press the button.
On the next screen, enter your network's
security code or pass phrase.
Enter letters by selecting a letter with the
,.
buttons, and then pressing the
button.
When finished, select , and then press
the button. The product searches for the
network.
The Network connection fail screen appears.
Use
buttons to select , and
then press the button.
Loading ...
Loading ...
Loading ...