Loading ...
Loading ...
Loading ...
21 - English
Network Setup
When you connect this product to a network, you
can use network based applications and functions
such as Smart Hub and BD-LIVE, and upgrade the
product's software through the network connection.
For more information about accessing and using
Internet services, see the Network Services chapter
of this manual on pages 42~49. Instructions for
configuring the network connection start below.
If you didn't configure your network connection during
the initial settings procedure or you need to reset the
network connection, follow the directions below.
Before you begin, contact your Internet Service
Provider to find out if your IP address is static or
dynamic. If it is dynamic, and you have a wired
or wireless network, we recommend using the
Automatic configuration procedures described below.
If you are connecting to a wired network, connect the
product to your router using a LAN cable before you
start the configuration procedure.
To begin configuring your network connection, follow
these steps:
In the Home screen, select , and then
press the button.
Select , and then press the button.
Select , and then press the
button.
Go to the instructions for Wired networks
starting or the instructions for Wireless networks
starting on page 22.
Ğ
After following Steps 1 to 3 above:
In the screen, change
to . Then, select
and press the button. The product detects
the wired connection, verifies the network
connection, and then connects to the network.
When it is done, highlight , and then press
button.
Ğ
If you have a static IP address or the automatic
procedure does not work, you'll need to set the
values manually.
After following Steps 1 to 3 above:
In the screen, change
to . Then, select
and press the button.
The product searches for a network, and then
displays the connection failed message.
✎
If it is possible to connect the home cinema to
your network wirelessly, select
at this point, change the to
, and then go to the instructions for
wireless networks on the next page.
Use the buttons to select , and
then press the button. The
screen appears.
Select the field, and then set it to
.
Select a parameter to enter (, for
example), and then press . Use the
,.
buttons on the remote control to enter the
numbers for the parameter.
Or use the Num
keypad to enter a parameter number.
Press and
hold the button until the Num pad appears on
the screen. When the Num pad appears, select a
number using the
,.
button and then press
the
button.
Use the buttons on the
remote control to move from entry field to entry
field within a parameter. When done with one
parameter, press the button.
Press the
,
or
.
button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 4.
Repeat Steps 4 and 5 until you have filled in all
parameters.
Loading ...
Loading ...
Loading ...