Loading ...
Loading ...
Loading ...
23 - English
Select the field, and then set it to
.
Select a network parameter to enter (
, for example), and then press
button. Use the
,.
buttons on the remote
control to enter the numbers for the parameter.
Or use the Num keypad to enter a parameter
number.
Press and hold the button until the
Num pad appears on the screen. When the Num
pad appears, select a number using the
,.
button and then press the
button.
Use the
buttons on the remote control to move from
entry field to entry field within a parameter. When
done with one value, press the button.
Press the
,
or
.
button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 8.
Repeat Steps 8 and 9 until you have filled in all
parameters.
✎
You can get the Network parameter values from
your Internet provider.
When finished, select , and then press the
button. The Security screen appears.
On the Security screen, enter your network's
security code or pass phrase. Enter letters by
selecting a letter with the
,.
buttons, and
then pressing the button.
When finished, select at the right of the
screen, and then press the button. The
product verifies the network connection and
then connects to the network.
After the home cinema verifies the network,
select , and then press the button.
✎
You can also begin the Manual Network setup by
going to .
Ğ
One of the easiest ways to set up the wireless
network connection is using the function.
If your wireless router has a button, follow
these steps:
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 21:
In the screen, change
to . The product
searches for and then displays a list of the
available networks.
Scroll the list down, select , and then
press the button.
Press the button on your router
within two minutes. Your product automatically
acquires all the network settings values it needs
and connects to your network after the network
connection is verified.
When it is done, highlight , and then press
the button.
✎
For a WPS connection, set your wireless router’s
security encryption to AES. WEP security
encryption does not support a WPS connection.
Wi-Fi Direct
The function allows you to connect
devices to the product and each other
using a peer-to-peer network, without a wireless
router.
✎
Some devices may not support the
AllShare function if connected via . If
this is the case, change the network connection
method you used to connect the device to the
home cinema.
✎
transmissions can interfere with
Bluetooth signals. Before you use the Bluetooth
function, we strongly recommend that you turn off
the function on any device in which
it is currently on.
Turn on the device and activate its
function.
In the Home screen, select , and then
press the button.
Select , and then press the button.
Select , and then press the
button.
The devices that you can connect
the home cinema to appear.
Loading ...
Loading ...
Loading ...