Loading ...
Loading ...
Loading ...
178
A AJN ADJUST NO ×××Exits RS-232C adjustment mode.
AJY ADJUST YES
‡ ××Activates RS-232C adjustment mode.
A4N AUTO INPUT NO
×××Turns OFF SCART RGB.
A4Y AUTO INPUT YES
×××Turns ON SCART RGB.
B BRT BRIGHTNESS × ‡‡Adjust BRIGHTNESS.
BHI BLUE HIGH
× ‡‡Adjust BLUE HIGH-LIGHT.
BLW BLUE LOW
× ‡‡Adjust BLUE LOW-LIGHT.
BR1 BAUD RATE 1
×××Sets the RS-232C baud rate to 1200bps.
BR2 BAUD RATE 2
×××Sets the RS-232C baud rate to 2400bps.
BR3 BAUD RATE 3
×××Sets the RS-232C baud rate to 4800bps.
BR4 BAUD RATE 4
×××Sets the RS-232C baud rate to 9600bps.
BR5 BAUD RATE 5
×××
Sets the RS-232C baud rate to 19200bps.
C CFR CLOCK FREQ. × ‡‡Adjust PLL frequency.
CM1 COLOR MODE 1
‡ ××
Makes white-balance adjusting data Mode 1.
CM2 COLOR MODE 2 ‡ ××
Makes white-balance adjusting data Mode 2
(retake).
CNT CONTRAST × ‡‡Adjust CONTRAST.
CNN SCART RGB NO
×××Turns OFF RGB2 priority mode.
CNY SCART RGB YES
×××Turns ON RGB2 priority mode.
COL COLOR
× ‡‡
Adjusts COLOUR (except for RGB setting).
CPH CLOCK PHASE × ‡‡Adjust PLL phase.
D DIN DISP NO
×××Disable OSD indication (except for
menu screen, etc.).
DIY DISP YES
×××Enables OSD indication (except for
menu screen, etc.).
DOF DISPLAY OFF
×××Turns OFF OSD indication.
DW0 DOWN 10
× — — Makes the adjustment value 10 DOWN.
DWn DOWN n
× — — Makes the adjustment value n DOWN.
DWF DOWN FULL
× — — Minimize the adjustment value.
F FMN FULL MASK NO ×××Cancels FULL MASK.
FMY FULL MASK YES
×××Turns ON FULL MASK WHITE.
FMR FULL MASK RED
×××Turns ON FULL MASK RED.
FMG FULL MASK GREEN
×××Turns ON FULL MASK GREEN.
FMB FULL MASK BLUE
×××Turns ON FULL MASK BLUE.
FMK FULL MASK YELLOW
×××Turns ON FULL MASK YELLOW.
FMM
FULL MASK MAGENTA
×××Turns ON FULL MASK MAGENTA.
FMC FULL MASK CYAN
×××Turns ON FULL MASK CYAN.
FRP FRESH POSITION
×××
Restores picture quality, white-balance adjusting
data to center values.
FRW FRESH WHITE BAL. ×××
Returns phase adjustment data to cen ter values.
Command
name
Name
Validity in
normal
mode
Validity of
number-
direct
command
Function
Validity of
UP/
DOWN
command
RS-232C adjustment mode
5.4.3 RS-232C commands table
Explanation of the tables
• Normal validity : Indicates whether normal mode can be used. Commands that may be used even when
not in RS-232C adjustment mode (after sending <AJY> commands).
• Number direct : Commands sent directly followed by numbers (3 digits), which immediately become the
new adjusted values.
• UP/DOWN command : Commands followed by UPn/DWn (n is any number from 0 to 9) are capable of incrementing
adjustment values up or down in increments of their values.
‡: Valid ×: Invalid
Loading ...
Loading ...
Loading ...