Loading ...
Loading ...
Loading ...
162
5.2 Menu mode
5.2.1 Various adjustments and setting
*1
When you select INIT. , the message on the right is displayed.
Select “YES” or “NO” by using the 2 or 3 button.
Selecting “YES” and pressing the SET button sets back all
picture quality settings to their default values.
When “NO” is selected, all settings will remain as they are.
Performing adjustments on the plasma display operation panel
and remote control
MENU
INPUT
SELECT
VIDEO
Y/C
RGB 1
ST
A
N
D
BY
/O
N
RGB 2
SET
1) RGB-1 (BNC) or RGB-2 (MINI D-
SUB) Input:
Adjust the picture quality for each input: the RGB-1 (BNC),
the RGB-2 (MINI D-SUB), the video, and the Y/C.
* Refer to page 51 for the sources.
SET
STANDBY
/ON
INPUT
MENU
ADJUST
• The currently selected item will
be displayed in purple.
Choose the item to be adjusted.
ADJUST
SET
SET
P
I
CTURE PARAMETER
: ADJ. SET : EXIT
CONTRAST
Switch to the MENU screen.
MENU
MENU
P
I
CTURE PARAMETER
CONTRAST
BR
I
GHT.
CLK. FRQ.
CLK. PHS.
HOR. POS.
VER. POS.
I
N
I
T.
SCART RGB
SET : SEL. MENU : EXIT
+ 1 0
– 5
0
+ 8
OFF
P
I
CTURE PARAMETER
CONTRAST
BR
I
GHT.
CLK. FRQ.
CLK. PHS.
HOR. POS.
VER. POS.
I
N
I
T.
SCART RGB
SET : SEL. MENU : EXIT
+ 1 0
– 5
0
+ 8
OFF
Finalize your choice.
Make adjustment concerning each item as follows:
CONTRAST ......... Adjusts the contrast of the
picture according to the brightness of
the environment so that you can watch
the picture easier.
BRIGHT ............. Adjusts the brightness of the picture
so that you can watch the darker parts
of the picture easier.
CLK.FRQ. .......... When part of the letters in the picture
is missing, or if the displayed image is
distorted as a rainbow-like noise, use
this function. This function is to adjust
the frequency of the internal clock signal
for the video signal input.
NOTE:
HOR.POS may need to be adjusted in
some cases if CLK.FRQ has been
adjusted.
CLK.PHS............ When some letters in the picture flicker
and the color becomes distorted, use
this function. Adjust it to minimize the
flicker and the color distortion. This
function is to adjust the phase of the
internal clock signal, which is adjusted
with the CLK. FRQ function.
HOR.POS. ......... Adjust the horizontal position of the
picture.
VER.POS. .......... Adjust the vertical position of the
picture.
INIT.................... Returns the above picture settings to
their center values. *1
SCART RGB .... This switches the synchronizing signal
mode.
Always leave it OFF, except for
RGB input to a unit with a Euro AV
terminal.
If “NO” has been selected,
SET:EXIT will be displayed
here.
If “YES” has been se-
lected, SET:INIT will be dis-
played.
(–32 to +32)
(–128 to +127)
(–32 to +32)
Remote control
Main unit
Remote control
Main unit
Remote control
Main unit
(–32 to +32)
• Displayed only for RGB-1.
(PDP-V402 ONLY)
• Displayed only for RGB-1.
(PDP-V402 ONLY)
(ON/OFF)
(Displayed only
for RGB-1)
(PDP-V402 ONLY)
P
I
CTURE PARAMETER
SET : EX
I
T
I
N
I
T
I
AL
I
ZE?
YES NO
Loading ...
Loading ...
Loading ...