Loading ...
Loading ...
Loading ...
160
No.
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
ITEM
HOUR METER counting No.
KEY LOCK/UNLOCK
Mask color when PC-9800
is used
Setting of mask when NTSC is used
MP mode
CONTRAST adjustment data
BRIGHT. adjustment data
COLOR adjustment data
TINT adjustment data
SHARPNESS adjustment data
R HIGH adjustment data
G HIGH adjustment data
B HIGH adjustment data
R LOW adjustment data
G LOW adjustment data
B LOW adjustment data
CLK.FRQ. adjustment data
CLK.FHS. adjustment data
HOR.POS. adjustment data
VER.POS. adjustment data
AUTO RGB2
OSD enable / disable
FULL MASK
SCART RGB
MEMORY TIMING
At any time, and when STANDBY status is activated
Approx. 4 seconds after operation
Approx. 4 seconds after operation
Approx. 4 seconds after operation
Approx. 4 seconds after operation
When adjusting using the main body operation panel or remote control,
a) when STANDBY status is activated
b) when the non-operational period persists for approx. 180 seconds,
and operation is switched to Normal Operations mode
c) when switching to Normal Operations mode by pressing the MENU button
d) when switching to Normal Operations mode by pressing the KEY
LOCK button on the main body
e) when switching to Normal Operations mode after the input signal is
switched over externally
f) when switching to RS-232C adjustment mode using the <AJY>
command
g) when hierarchy is restored by pressing the SET button.
When adjusting using the RS-232C command,
a) when STANDBY status is activated
b) when the non-operational period persists for approx. 30 seconds,
and the OSD indication disappears
c) when switching to Normal Operations mode using the <AJN> command
d) when switching to Normal Operations mode by pressing the main-
body operation-panel button
e) when switching to Normal Operations mode after the input signal is
externally switched over
f) when switching to Menu mode by pressing the MENU button
g) when switching to Normal Operations mode by pressing the main-
body operation-panel button or the remote control, in KEY LOCK status
h) when adjustment items are changed
Approx. 4 seconds after operation
Approx. 4 seconds after operation
Approx. 4 seconds after operation
Note: However, when FULL MASK is set using the remote control and
main operation panel, the last memory operation is not performed.
Approx. 4 seconds after operation
Before making adjustments
• When the breaker is turned on or off to start or stop an entire system, such as a permanent system, the timing
conditions above are required in order to save the latest data in the memory.
5.1.7 Aging
• When power is turned on, input signals that will not cause screen burnout, such as a 100% white signal or LD
animation, perform aging (for approx. 30 min) until the system is stable. After aging, adjustments may be performed
smoothly and accurately.
Note: Screen burnout may occur if PAUSE operation is used for long display.
Loading ...
Loading ...
Loading ...