Loading ...
Loading ...
Loading ...
Using a wireless network connection and switching on Wake on Wireless
Network, this feature can make you turn on the TV from the standby mode,
and push content to be broadcast on the TV with an app supporting the
screencast feature in your mobile device.
For more information about screencast feature, please refer to Multi-screen >
Screen Sharing or Content Sharing in this manual.
Note:
• To use this function, make sure your TV and mobile device are connected
to the same network environment.
• Enabling this function may result in higher energy consumption.
Related Topic
• Network Issues
Connecting Bluetooth Devices
You can connect to devices using Bluetooth technology.
/ > Settings > Network > Bluetooth
Note:
• Bluetooth function may not be applicable in some models/countries/
regions.
Connecting a Bluetooth remote
Pair the Bluetooth remote with the TV.
1. Pair the Bluetooth remote to the TV after you power the TV on, and set
/ > Settings > Network > Bluetooth to On.
2. Keep the remote control within 3 metres from the TV. Press any button
(except power and mic button) to pair with the TV.
Note:
•
In special cases, press and hold / button to pair.
• This function may not be applicable in some models/countries/regions.
• If an unknown error occurred with the remote, it could have been caused
by interference. Try to remove what's causing the interference and pair it
again.
• If an unknown error occurred with the remote while the battery power is
normal, you can take out the batteries, press any key for 1~2 seconds,
and insert them back. Then the remote will work normally.
• The remote cannot be paired to the TV while the TV is in standby mode.
20
Loading ...
Loading ...
Loading ...