Loading ...
Loading ...
Loading ...
39
Recording
Recording
6
♦
When more than 3 timer recordings
overlap
If the entire programme or part of the programme
overlaps, the programme of the later schedule will
preferentially be recorded.
Timer
Programme
Actual
Recording
*
When 2 timer recordings will start at the same
time, the timer recording located lowest in the
Timer Programming screen will preferentially be
recorded.
Timer
Programme
Ti
mer programme
li
s
t
e
d
higher in the contents list
Timer programme listed
lower in the contents list
Actual
Recording
*
If the end time of a timer recording and the start time of
next timer recording are exactly the same time, the last
15 seconds (approx.) of the earlier recording will be cut.
Timer
Programme
Actual
Recording
*
* (for about 15 seconds) will not be recorded.
♦
When more than 2 timer recordings overlap
in the condition that a dual recording is
not possible (Refer to page 35)
The latter timer recording will be given priority.
If the start time of both timer programmes are the
same, the timer programme listed lower in the
Timer Programming list will be given priority.
In the earlier recording, the last 15 seconds before the
latter recording overlaps will be cut (including the case
that the end time of the earlier recording and the start
time of the latter recording are exactly the same time).
When a power outage occurs
♦
Overall
When recovered from a power outage, this unit will
automatically be turned on and perform the system
configuration. During system configuration, WAIT will
be displayed on the display panel.
If a timer recording is interrupted due to a power
outage, a notification message will appear in the
Timer Programming screen.
♦
By type of recording
If a power outage occurs during normal recording (by
pressing [
REC.] while viewing a DTV programme)
Recording will be terminated.
This unit will automatically be turned off after system
configuration.
If a power outage occurs before a timer recording.
After recovering from a power outage, the clock will be
readjusted. Timer programmes will remain.
If a power outage occurs while a timer recording is in
progress.
Recording will be terminated at the time of power outage.
If recovering from the power outage before the end time
of the timer recording, this unit will resume recording to
the end time, after system configuration.
If recovering from the power outage after the end time of
the timer recording, the recording will be terminated at
the time of power outage. This unit will automatically be
turned off after system configuration.
♦
By type of recording media
For HDD / USB-HDD
The recording title will be split into 2 pieces (before and
after power outage) and listed in the Contents List
screen.
A small part of the recording right before a power outage
may be lost.
The entire recording before a power outage may be lost
according to the circumstances of power outage.
There are cases that you need to initialise the HDD /
USB-HDD according to the circumstances of power
outage.
If a power outage occurs during a timer recording to the
USB-HDD, depending on the USB-HDD, this unit may
resume recording to the internal HDD.
For BD-RE / BD-R discs
The disc may become no longer usable according to the
circumstances of power outage.
If there is a timer recording right after recovering
from the power outage and this unit cannot record to
the disc for some reason, the timer recording will be
performed to the HDD. This recording will be listed in the
Contents List for HDD.
When a timer recording fails
appears on the failed timer programme in
Timer Programming screen, and the programme is
shown in grey. If selecting the programme then press
[
ENTER], information will be displayed. Selecting
Return will bring you back to Timer Programming
screen. Selecting Delete message will delete the
programme from the Timer Programming screen.
Loading ...
Loading ...
Loading ...