Loading ...
Loading ...
Loading ...
18
Basic Setup
Network Setup
Network settings are to enable the BD-Live features on
this unit using the broadband Internet connection.
Please also refer to the information provided by your ISP
(Internet Service Provider) and the user manual of your
modem / router.
Press [
HOME], then select Settings >
Network Settings > Network Connection > Auto or
Manual.
Settings
Network Connection
BD-Live Setting : Allow
Displaying network status
Video/Audio
Language
HDMI
3D settings
Playback
Recording
Clock
Network Settings
Others
Check network settings of this device.
Network Connection
Please select setting mode.
Auto
Manual
Auto:
Automatically configures each setting item in
Network Connection, and then performs a connection
test.
Manual:
Requests you to manually configure the setting A E
on pages 18 to 19.
Note
Please perform a connection test when changing the
network settings in Network Connection.
♦
For Manual
A: IP Address Setting
1. Configure IP Address / Subnet Mask /
Default Gateway.
1) Use [ / ] to select IP Address Setting, then
press [
ENTER].
�
The acquisition method will be displayed.
2) Select your desired method, then press [ ENTER].
�
Auto(DHCP) is recommended in most cases.
Auto(DHCP):
Automatically configures the IP Address / Subnet
Mask / Default Gateway. Please proceed to (B).
Manual:
Requires you to manually configure the IP
address / Subnet Mask / Default Gateway. In
case your router does not have a DHCP server
function or you would rather not use it, please
select Manual, then proceed to 3).
3) Use [ / ] to select IP Address, then press
[
ENTER].
�
Entry screen will be displayed.
4) Enter number using [number buttons], then press
[ ENTER].
�
To move from a number cell to another, use
[
/ ].
�
For an IP Address for this unit, refer to the IP
address on your PC on the same local area
network, then change the last 2-digit number to
your desired number (up to 3-digit numbers).
e.g.) When the PCs IP Address is
192.168.10.12, enter a number such as
192.168.10.223. The 223 can be any number
except 12.
�
For Subnet Mask and Default Gateway,
please enter the same numbers as those on
your PCs network setting.
�
When you enter a wrong number, select Clear
to clear the incorrect number, then press
[
ENTER].
�
After having entered all the necessary numbers,
select OK, then press [ ENTER].
�
Configure Subnet Mask and Default Gateway
in the same manner as IP Address.
2. After having configured all the network
settings, select OK in the sub menu using
[ ], then press [ ENTER].
3. Press [
BACK] repeatedly to exit.
B: DNS Setting
1. Configure the primary DNS / secondary
DNS.
1) Use [ / ] to select DNS Setting, then press
[
ENTER].
�
The acquisition method will be displayed.
2) Select your desired method, then press [ ENTER].
�
Auto(DHCP) is recommended in most cases.
Auto(DHCP):
Automatically configures the primary DNS /
secondary DNS by the DHCP server function.
Please proceed to (C).
Manual:
Requires you to manually configure the primary
DNS / secondary DNS. In case your router does
not have a DHCP server function or you would
rather not use it, please select Manual, then
proceed to 3).
3) Use [
/ ] to select Primary DNS, then press
[
ENTER].
�
Entry screen will be displayed.
4) Enter number using [number buttons], then press
[ ENTER].
�
To move from a number cell to another, use
[
/ ].
�
For the primary DNS, enter the same numbers
as those in Preferred DNS Server on your
PCs network setting. When you enter a wrong
number, select Clear to clear the incorrect
number, then press [
ENTER].
�
After having entered all the necessary numbers,
select OK, then press [ ENTER].
5) Configure Secondary DNS in the same manner as
Primary DNS.
�
For the secondary DNS, enter the same
numbers as those in Alternate DNS Server on
your PCs network setting.
2. After having configured all the network
settings, select OK in the sub menu using
[ ], then press [ ENTER].
3. Press [ BACK] repeatedly to exit.
Loading ...
Loading ...
Loading ...