Installation Instructions Guide - Page 52

For NZ84T9747VK/UR. Also, The document are for others Samsung models: NZ84T9747VK, NZ84T9747UK

Loading ...
Loading ...
Loading ...
52
EN - Instruction on mounting and use
Symbols used in this manual
WARNING
Hazards or unsafe practices that may result in severe
personal injury or death.
CAUTION
Hazards or unsafe practices that may result in electric shock,
personal injury, or property damage.
NOTE
Useful tips and instructions
These warning icons and symbols are here to prevent injury to
you and others.
Please follow them explicitly. After reading this section, keep it
in a safe place for future reference.
Strictly observe the instructions in
this manual. No liability will be assumed
for any problems, damage or fires
caused by failure to comply with the
instructions in this manual. The device is
intended for domestic use only, to cook
food and extract the fumes generated by
cooking. No other use is allowed (e.g.
heating rooms). The manufacturer
declines any liability for inappropriate use
or incorrect setting of the controls.
The product may have different aesthetic features with
respect to the illustrations in this handbook, however
the operating, maintenance and installation
instructions remain the same.
! Read the instructions carefully: they contain important
information on installation, operation and safety.
! Do not make electrical changes to the product.
! Before installing the device, check that none of the
components are damaged. Otherwise, contact the dealer
and do not continue with the installation.
! Check the integrity of the product prior to its installation.
Otherwise, contact the dealer and do not continue with
the installation.
Note: The parts marked with the symbol "(*)" are optional
accessories supplied only with some models or otherwise not
supplied, but available for purchase.
Caution
Caution! Strictly observe the following
instructions:
-The device must be disconnected from
the electrical network before performing
any installation work.
-Installation or maintenance must be
performed by a qualified technician, in
compliance with the manufacturer's
instructions and with local safety
regulations. Do not repair or replace any
part of the device unless specifically
stated in the operating manual.
-Earthing the device is compulsory.
-The power cable must be long enough
to allow the device, built-in to the cabinet,
to be connected to the electrical network.
-In order to ensure the installation
complies with current safety standards, a
regular omnipolar switch is required that
assures the complete disconnection of
the mains under category III over-voltage
conditions, in accordance with the
installation rules.
-Do not use multiple sockets or extension
cords.
-Once installation is complete, the
electrical components must no longer be
accessible by the user.
- The device and its accessible parts heat
up during use. Be careful not to touch the
Loading ...
Loading ...
Loading ...