Loading ...
Loading ...
Loading ...
Emergencies
●
The high vo
ltage element of gas discharge
bulbs* (xenon light) must be handled correct-
ly. Otherwise, there is a risk of death.
●
When changing bulbs, please take care not
to injure yourself on sharp parts in the head-
light housing.
CAUTION
●
R
emov
e the ignition key before working on
the electric system. Otherwise, a short circuit
could occur.
●
Switch off the lights or parking lights be-
fore you change a bulb.
For the sake of the environment
Please ask your specialist retailer how to dis-
pose of u
sed bulbs in the proper manner.
Note
●
Depending on w
eather conditions (cold or
wet), the front lights, the fog lights, the tail
lights and the turn signals may be temporari-
ly misted. This has no influence on the useful
life of the lighting system. By switching on
the lights, the area through which the beam
of light is projected will quickly be demisted.
However, the edges may continue to be mis-
ted.
●
Please check at regular intervals that all
lighting (especially the exterior lighting) on
your vehicle is functioning properly. This is
not only in the interest of your own safety,
but a
lso that of all other road users.
●
Before changing a bulb, make sure you
have the correct new bulb.
●
Do not touch the glass part of the bulb with
your bare hands, use a cloth or paper towel
instead. The residue left by the fingerprints
would vaporise as a result of the heat gener-
ated by the bulb, they will be deposited on
the reflector and will impair its surface.
Single headlight bulb change
P
o
s
ition of the bulbs
Fig. 91 Single headlight.
Side lights - Dipped beam/main beam.
T
urn s
ign
al light.
DRL (day light)
A
B
C
Turn signal and DRL (day light) light
Fig. 92 Single headlight DRL light (day light).
Fig. 93 Single turn signal lamp.
–
Raise the bonnet.
–
Turn the bulb holder ›
›
›
Fig. 92
1
or
›
›
›
Fig. 93
2
to the left and pull.
–
Remove the bulb by pressing on the bulb
ho
l
der and t
urning it anti-clockwise at the
same time.
84
Loading ...
Loading ...
Loading ...