Loading ...
Loading ...
Loading ...
Operation
Rear shelf with storage compartment*
3 Applies to the model: IBIZA ST
Fig. 160 Luggage compartment: removing
s
t
or
age compartment.
Fig. 161 Accessing storage compartment.
To remove the storage compartment
–
Remove the rear shelf and pull the storage
c
omp
ar
tment upwards holding it by the
edges ››› Fig. 160.
The storage compartment can be accessed
from the rear seats by lifting the front part of
the rear shelf ››› Fig. 161.
WARNING
Do not place heavy or hard objects on the
rear shelf
, because they will endanger the ve-
hicle occupants in case of sudden braking.
CAUTION
●
Befor
e closing the rear lid, ensure that the
rear shelf is correctly fitted.
●
An overloaded luggage compartment could
mean that the rear shelf is not correctly seat-
ed and it may be bent or damaged.
●
If the luggage compartment is overloaded,
remove the tray.
●
The load in the storage compartment
should not exceed 3 kg.
Note
●
Ensur
e that, when placing items of clothing
on the luggage compartment cover, rear visi-
bility is not reduced.
●
If your vehicle has a storage compartment*,
only place light objects inside.
Roof rack/roof luggage rack*
Intr
oduction
Please observe the following points if you in-
tend to c
arry loads on the roof:
●
For safety reasons, only luggage racks and
accessories supplied by SEAT Official Serv-
ices are recommended.
●
It is essential that you follow the assembly
instructions included with the bars exactly,
being especially careful to position front and
rear luggage compartment cover bars on the
special housings in the longitudinal bars.
You must also respect their position accord-
ing to the direction of travel indicated in the
assembly manual. Not following these in-
structions may damage the bodywork.
●
Pay special attention to the tightening tor-
que of the attac
hment bolts and check them
following a short journey. If necessary, re-
tighten the bolts and check them at regular
intervals.
●
Distribute the load evenly. A maximum load
of 40 kg is permitted for each roof rack sys-
tem support bar, the load must be distrib-
uted evenly along the entire length. However,
the maximum load permitted for the entire
roof (including the support system) of 75 kg
must not be exceeded nor the total weight
recommended for the entire vehicle. See the
“Technical Data” section.
142
Loading ...
Loading ...
Loading ...