Loading ...
Loading ...
Loading ...
Driving
the brakes to overheat and the braking
dist
ance will increase. Apply and then release
the brakes alternately.
●
Never let the vehicle run with the engine
switched off. The braking distance is in-
creased considerably when the brake servo is
not active.
●
If the brake fluid loses its viscosity and is
subjected to heavy use, vapour bubbles can
form in the brake system. This reduces the ef-
ficiency of the brakes.
●
Non-standard or damaged front spoilers
could restrict the airflow to the brakes and
cause them to overheat. Before purchasing
accessories please observe the relevant in-
structions ››› page 190, Modifications.
●
If a brake system circuit fails, the braking
distance will be increased considerably. Con-
tact a specialised workshop immediately and
avoid unnecessary journeys.
Handbrake
Fig. 169 Handbrake between the front seats.
The handbrake should be applied firmly to
pr
ev
ent
the vehicle from accidentally rolling
away. Always apply the handbrake when you
leave your vehicle and when you park.
Applying the handbrake
–
Pull the handbrake lever up firmly
››› Fig. 169.
Releasing the handbrake
–
Pull the lever up slightly and press the re-
lease knob in the direction of the arrow
››› Fig. 169 and guide the handbrake lever
down fully ›››
.
A
lw
a
ys pull the handbrake all the way up, so
there is less risk of driving off with it still en-
gaged ›››
.
The handbrake warning lamp lights
up
when the h
andbr
ake is applied and the igni-
tion switched on. The warning lamp turns off
when the handbrake is released.
WARNING
●
Never use the h
andbrake to stop the vehi-
cle when it is in motion. The braking distance
is considerably longer, because braking is
only applied to the rear wheels. Risk of acci-
dent!
●
If the handbrake is only partially released,
this will cause the rear brakes to overheat,
which can impair the function of the brake
system and could lead to an accident. This al-
so causes premature wear on the rear brake
pads.
CAUTION
Always apply the handbrake before you leave
the vehic
le. Put it in 1st gear as well. In vehi-
cles with an automatic gearbox, place the
gear lever in position P.
Parking
The handbrake should always be firmly ap-
p
lied when the
v
ehicle is parked.
Always note the following points when park-
ing the vehicle:
–
Use the brake pedal to stop the vehicle.
»
157
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...