Loading ...
Loading ...
Loading ...
Wheels
for your model. Failure to do so could impair
vehicl
e handling. Risk of accident.
●
Avoid running the vehicle on tyres that are
more than 6 years old. If you have no alterna-
tive, you should drive slowly and with extra
care at all times.
●
Never use old tyres or those with an un-
known “history of use”.
●
If wheel trims are retrofitted, you must en-
sure that the flow of air to the brakes is not
restricted. This could cause the brake system
to overheat.
●
All four wheels must be fitted with radial
tyres of the same type, size (rolling circumfer-
ence) and the same tread pattern.
For the sake of the environment
Old tyres must be disposed of according to
the law
s in the country concerned.
Note
●
For tec
hnical reasons, it is not generally
possible to use the wheels from other vehi-
cles. This can also apply to wheels of the
same model. The use of wheels or tyres
which have not been approved by SEAT for
use with your model may invalidate the vehi-
cle's type approval for use on public roads.
●
If the spare tyre is not the same as the
tyres that are mounted on the vehicle (e.g.
winter tyres) you should only use the spare
tyre for a short period of time and drive with
extra care. Refit the normal road wheel as
soon as po
ssible.
Wheel bolts
The design of wheel bolts is matched to the
rims. If differ
ent wheel rims are fitted, the
correct wheel bolts with the right length and
correctly shaped bolt heads must be used.
This ensures that wheels are fitted securely
and that the brake system functions correctly.
In certain circumstances, you should not use
wheel bolts from a different vehicle, even if it
is the same model ››› page 190.
WARNING
If the wheel bolts are not tightened correctly,
the wheel cou
ld become loose while driving.
Risk of accident.
●
The wheel bolts must be clean and turn
easily. Never apply grease or oil to them.
●
Use only wheel bolts which belong to the
wheel.
●
If the prescribed torque of the wheel bolts
is too low, they could loosen whilst the vehi-
cle is in motion. Risk of accident! If the tight-
ening torque is too high, the wheel bolts and
threads can be damaged.
CAUTION
The prescribed tightening torque for wheel
bolts
for steel and alloy wheels is 120 Nm.
Winter service
Winter ty
res
In winter conditions winter tyres will consid-
erably
improve the vehicle's handling. The
design of summer tyres (width, rubber com-
pound, tread pattern) gives less grip on ice
and snow.
Winter tyres must be inflated to a pressure of
0.2 bar (2.9 psi/20 kPa) higher than the pres-
sures specified for summer tyres (see sticker
on fuel tank flap).
Winter tyres must be fitted on all four wheels.
Information on permitted winter tyre sizes
can be found in the vehicle's registration
documentation. Use only radial winter tyres.
All tyre sizes listed in the vehicle documenta-
tion also apply to winter tyres.
Winter tyres lose their effectiveness when the
tread is worn down to a depth of 4 mm.
The speed rating code
›››
page 214, New
tyres and wheels determines the following
speed limits for winter tyres:
›››
max. 160 km/h (99 mph)
»
Q
215
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...