Loading ...
Loading ...
Loading ...
Seats and head restraints
Folding down the back seat
Fig. 143 Folding up the rear seat cushion.
Fig. 144 Button for unlocking the rear back-
r
e
s
t.
Folding seat down
–
Remove the head restraint ›
›
›
page 133.
–
Pull the front edge of the seat cushion
››› Fig. 143
1
upwards in the direction of
the arr
o
w
.
–
Lift the cushion
2
forwards in the direc-
tion of
the arr
o
w.
–
Pull the release button ››› Fig. 144 in the di-
rection of the arrow and fold the backrest
forwards.
–
Insert the head restraints in the spaces on
the rear of the seat cushion which are visi-
ble when the seat cushion is lowered.
Folding seat forward
–
Remove the head restraints from the
spaces in the seat cushion.
–
Lift the backrest, and before securing it, re-
place the head restraints in the seat cush-
ion, and then click the seat correctly onto
the locking rails.
–
Once the backrest is locked, pull on the
central seat belt or directly on the backrest
to check that the backrest has properly en-
gaged in position.
–
Check that the position lever is in neutral
position.
–
Lower the cushion and push it backwards
below the seat belt buckles.
–
Press the front part of the cushion down-
wards.
On split rear seats*, the backrest and cush-
ion can be lowered and raised respectively in
two sections.
WARNING
●
Plea
se be careful when folding back the
backrest! Injuries can be caused if the seat
height is adjusted without due care and at-
tention.
●
Do no trap or damage seat belts when rais-
ing the backrest.
●
After raising the backrest, check it has en-
gaged properly in position. Do this by pulling
on the central seat belt or directly on the
backrest and check that the position lever is
in the neutral position.
●
The three point automatic seat belt only
works correctly when the backrest of the cen-
tral seat is correctly engaged.
135
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...