Loading ...
Loading ...
Loading ...
Air conditioning
Blower
The air flo
w c
an be set
at four speeds with
switch
B
. The blower should always be set
at
the lo
w
est speed when driving slowly.
Air distribution
Control
C
for setting the flow of air in the re-
quir
ed dir
ection.
– Air distribution towards the windscreen
in order to demist. For safety reasons, it is
not recommended to switch air recirculation
on.
– Air distribution to upper body.
– Air distribution to footwell
– Air distribution to the windscreen and
the footwell.
WARNING
●
For y
our safety, the windows should never
be fogged up or covered with snow or ice.
This is essential to ensure good visibility.
Please familiarise yourself with the correct
operation of the heating and ventilation sys-
tem, including the demist/defrost functions
for the windows.
Note
●
Plea
se consider the general notes
››› page 144.
Air recirculation
Air recirculation prevents unpleasant smells
from enterin
g the interior.
Connecting the recirculation
In any position of rotary switch
C
except
thaw:
●
Pr
ess button
D
››› Fig. 165 and the l
amp in
the button will illuminate.
Disconnecting the recirculation
●
If the lamp is on, press button
D
and the
l
amp w
i
ll go off, indicating that the entry of
outside air has been activated.
If the rotary switch
C
›
›
›
Fig. 165 is in the
thaw position, the recirculation flap will al-
ways be open and air will always enter from
the outside.
If the rotary switch
C
is switched from any
po
s
ition t
o the thaw position, recirculation
will be automatically deactivated.
WARNING
●
In air recir
culation mode, no cold air from
the outside enters the vehicle interior. The
windows can quickly fog over if the heating is
switched off. Therefore, never leave the air re-
circulation mode switched on for a long time
(risk of accident).
Vehicle ventilation or heating
Ventilating the vehicle interior
–
Turn the temperature selector ›››
Fig. 165
A
anticlockwise.
–
Turn blower switch
B
to any of the head
settings
1 -4.
–
Set the airflow to the desired direction us-
ing air distribution control
C
.
–
Open the relevant air outlets.
Interior heatin
g
–
Turn the temperature selector ›››
Fig. 165
A
clockwise to select the desired tempera-
t
ur
e.
–
T
urn blower switch
B
to any of the head
settin
g
s
1 -4.
–
Set the airflow to the desired direction us-
ing air distribution control
C
.
–
Open the relevant air outlets.
D
efr
o
sting the windscreen
–
Turn the temperature selector
›››
Fig. 165
A
clockwise to reach the maximum tem-
per
at
ur
e.
–
Turn the blower switch
B
to setting 4.
–
Turn air distribution control to .
–
Close outlet
3
.
»
147
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...