Loading ...
Loading ...
Loading ...
Operation
Note
●
If the con
venience turn signals are operat-
ing (three flashes) and the other convenience
turn signals are switched on, the active part
stops flashing and only flashes once in the
new part selected.
●
The turn signals only work when the igni-
tion is switched on. The corresponding warn-
ing lamp or flashes in the instrument
panel. The control lamp flashes when the
turn signals are operated, provided a trailer is
correctly attached and connected to the vehi-
cle. If a turn signal bulb is defective, the con-
trol lamp flashes at double speed. If the trail-
er turn signal bulbs are defective, the control
lamp does not light up. Change the bulb.
●
The main beam headlights can only be
switched on if the dipped beam headlights
are already on. The warning lamp then
comes on in the instrument panel.
●
The headlight flasher comes on for as long
as you pull the lever – even if no other lights
are switched on. The warning lamp then
comes on in the instrument panel.
●
When the parking lights are switched on,
the headlight and the tail light on the corre-
sponding side of the vehicle light up. The
parking lights will only work if the key is re-
moved from the ignition. If said light is on, an
audible warning will be emitted while the
driver door is open.
●
If the turn signal lever is left on after the
key has been taken out of the ignition lock,
an acoustic signal sounds when the driver
door is opened. This is intended as a remind-
er to swit
ch off the turn signal, unless you
wish to leave the parking light on.
Coming Home/Leaving Home Func-
tion*
The Coming Home function is controlled man-
ually.
The Leaving Home function is control-
led with a photosensor.
If the Coming Home or Leaving Home func-
tion is connected, the front side and dipped
lights, the tail lights and the number plate
light will light up to provide assistance.
Coming home function
The Coming Home function is activated by
switching off the ignition and briefly flashing
the lights. When the driver door is opened,
the Coming Home lighting comes on. If the
driver door is already open when the lights
are flashed briefly, the Coming Home lighting
comes on immediately.
When the last door of the vehicle or the rear
lid is closed, the Coming Home function
starts and the switching off the headlights is
delayed.
The Coming Home lighting switches off in the
following cases:
●
On compl
etion of the time period establish-
ed for the delay in switching off the lights af-
ter all the vehicle doors and the rear lid have
been closed.
●
If, 30 seconds after being connected, any
doors or the rear lid remain open.
●
If the light switch is turned to position .
●
If the ignition is switched on.
Automatic Leaving Home function
The Leaving Home function is activated when
the vehicle is unlocked if:
●
the light control is in position and
●
the photosensor detects “darkness”.
The Leaving Home lighting switches off in the
following cases:
●
If the time period for the delay in switching
off the headlights has ended
●
If the vehicle is locked again.
●
If the light switch is turned to position .
●
If the ignition is switched on.
Manual Leaving Home function
In vehicles without an automatic headlight
system (light sensor), if the manual Coming
Home function is activated when leaving the
car, upon returning to the car and unlocking
it the manual Leaving Home function will be
activated automatically.
126
Loading ...
Loading ...
Loading ...