SC800 User Manual

User Manual - Page 99

For SC800. Also, The document are for others Nilfisk models: 56112000(SC750-26D), 56112004(SC750-28D), 56112006(SC750-28C), 56112012(SC750 ST-26D), 56112013(SC750 ST-28C), 56112016(SC800-28D), 56112018(SC800- 28C), 56112024(SC800-32C), 56112028(SC800-34D), 56112032(SC800 ST-34D), 56112780 (SC70- 28R)

Loading ...

Service Manual: SC750, SC800, SC 750 ST, SC800 ST

Form Number 56043150 Page 99

Motor Carbon Brushes

1. Remove the brush drive motor.

2. Mark the posion of the endplate to the motor casing for reassembly.

3. Remove the 2 through bolts and pry o the endplate assembly.

4. Replace the carbon brushes.

a. Observe how the springs roll when the brush is pushed back before taking it apart.

b. Remove a brush and spring.

c. Install a new brush and spring into the brush holder. Thread the brush wire lead through the brush

holder. Posion the back end of the brush in the “cup” of the spring so that the spring will unroll as the

brush is pushed back once it is installed.

Loading ...

Nilfisk SC800 Heavy-Duty Cleaning

User Manual - Page 99