SC800 User Manual

User Manual - Page 139

For SC800. Also, The document are for others Nilfisk models: 56112000(SC750-26D), 56112004(SC750-28D), 56112006(SC750-28C), 56112012(SC750 ST-26D), 56112013(SC750 ST-28C), 56112016(SC800-28D), 56112018(SC800- 28C), 56112024(SC800-32C), 56112028(SC800-34D), 56112032(SC800 ST-34D), 56112780 (SC70- 28R)

Loading ...

Service Manual: SC750, SC800, SC 750 ST, SC800 ST

Form Number 56043150 Page 139

Removal and Installation

Squeegee Tool

1. Remove vacuum hose from tool.

2. Loosen both wing nuts.

3. Remove squeegee tool.

4. Reassemble in reverse order. Note: Over-ghtening the wing nuts can lead to damaging the squeegee tool by

defeang the breakaway feature.

Squeegee Support

1. Remove squeegee tool.

2. Remove squeegee li cable from support.

3. Service Tip: The force of the springs against the pivot bolt causes it to p backwards and makes it dicult to get

the assembly removed and back into place. Neutralize the spring force by liing the support up a bit against the

spring tension and e it up with a wire. See photo.

4. Remove the lower pivot mounng nut.

5. Remove squeegee support assembly.

6. Reassemble in reverse order.

a. Cut wire used to hold spring tension.

Loading ...

Nilfisk SC800 Heavy-Duty Cleaning

User Manual - Page 139