Loading ...
Loading ...
Loading ...
Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 161
12. Reconnect the wiring.
13. Reinstall the paddle cover. (Reconnect the speed limit potenometer wiring.)
14. Rotate the handle assembly back up into posion and loosely install the top mounng bolts.
15. Tighten all 4 handle mounng bolts.
Paddle Centering Springs - Non-ST models - SC750, SC800
In the event that the paddle centering springs and hardware need to be replaced, these photos will help you assemble it
correctly.
1. Carefully remove the aaching screw. Pieces will y apart if you do not retain the springs.
2. When reassembling, install the “lower stack” rst. The shoulder of the nylon washers goes toward the spring.
Carefully posion the pieces so that they stay in place.
3. Next, prepare the upper stack for assembly as shown. Install it and ghten the screw. (Do not over-ghten the
screw or it will strip out the tower).
Loading ...
Loading ...
Loading ...