Loading ...
Loading ...
Loading ...
Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 49
push the tube onto the sensor port. Do not push too hard or the sensor may break.
12. Reassemble in reverse order nong the following:
a. Take care not to damage the printed circuit ribbons used to connect the circuit board to the control
switch interface panel.
b. Reinstall and secure the key switch, circuit breakers and handle wiring connector before fastening the
cover down.
c. If you did not drain the soluon tank earlier, you must do so before connecng the pressure sensor hose
in order for the soluon level “gauge” to work properly.
d. Refer to the wiring connecon decal on the back of the cover to reconnect any wires that may have
come loose. Double check all electrical connecons.
Loading ...
Loading ...
Loading ...