Loading ...
Loading ...
Loading ...
Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 156
Removal and Installation
Speed Limit Potentiometer – ST models
1. Loosen set screw and remove knob.
2. Remove potenometer mounng nut and washer.
3. Remove upper handle bolts.
4. Loosen lower handle bolts and rotate handle down.
5. Disconnect handle electrical connector.
6. Remove the access plate.
7. Disconnect 3 electrical connectors. Make sure you
carefully record the wire colors and their posions
so that you will be able to reconnect them correctly.
8. Remove potenometer.
9. Reassemble in reverse order.
Speed Limit Potentiometer – Non-ST models
1. Remove upper handle bolts.
2. Loosen lower handle bolts and rotate handle down.
3. From the back side of the paddle, remove the 4
screws securing the front cover. Parally remove the
front cover.
4. Disconnect the wiring from the speed limit poten-
ometer. Make sure you carefully record the wire
colors and their posions so that you will be able to
reconnect them correctly.
5. Remove front cover.
6. Remove the potenometer knob and mounng nut.
7. Reassemble in reverse order.
Loading ...
Loading ...
Loading ...