Nilfisk SC800 User Manual

User Manual - Page 29

For SC800. Also, The document are for others Nilfisk models: 56112000(SC750-26D), 56112004(SC750-28D), 56112006(SC750-28C), 56112012(SC750 ST-26D), 56112013(SC750 ST-28C), 56112016(SC800-28D), 56112018(SC800- 28C), 56112024(SC800-32C), 56112028(SC800-34D), 56112032(SC800 ST-34D), 56112780 (SC70- 28R)

Loading ...

Service Manual: SC750, SC800, SC 750 ST, SC800 ST

Form Number 56043150 Page 29

Programming Options –SC750 ST and SC800 ST Models (control panel with rocker switches)

Main Machine Controller special program opons allow the service repairperson to match the control board to the

specic model equipment and to user preferences. They also allow adjustments to some machine funcons, and provide

a way to see the controller’s revision level. On ST models each program opon mode is accessed by pressing a specic

conguraon of buons while turning the key on.

Mandatory Program Options

These opons are used to “inform” the Main Machine Controller how the machine is equipped. They must be set any-

me the Main Machine Controller is replaced and they must be set correctly for the machine to operate as it should.

Scrub Deck Type – There are 3 scrub deck opons. This funcon congures the control unit current sengs, ow rate

sengs, and scrub pressure sengs for each of the scrub deck types.

To check or change the seng:

1. While pressing and holding the vacuum, scrub and soluon switches backward, turn the

key switch on.

2. Wait about 3 seconds unl all of the LEDs light up and then go o. Release the switches.

The Regular Scrub Pressure and Heavy Scrub Pressure Indicators will remain on and the fault indicator will be ashing a

numeric value that represents the current seng. To change the seng, press the soluon switch forward to increase

the value or backwards to decrease the value. To save the seng, press the scrub switch forward (All LEDs will turn on)

then turn o the key switch.

• 1 blink = 28 Inch Cylindrical Brushes

• 2 blinks = 26 Inch Disc Brushes

• 3 blinks = 34 Inch Disc Brushes

Baery Charger Selecon –This funcon is used to inform the Main Machine Controller whether or not the machine

is equipped with the oponal S.P.E. on-board baery charger (The S.P.E charger was used on early machines. Later

machines use the Delta-Q IC650 baery charger). It is also used to inform the controller of what kind of baeries the

machine is equipped with. The Main Machine Controller will request a specic charging prole from the S.P.E baery

charger to match the baeries.

To check or change the seng:

1. While pressing and holding the scrub and soluon switches backward, turn the key

switch on.

2. Wait about 3 seconds unl all of the LEDs light up and then go o. Release the switches.

The red baery Indicator will remain on and the fault indicator will be ashing a numeric value that represents the cur-

rent seng. To change the seng, press the soluon switch forward to increase the value or backwards to decrease the

value. To save the seng, press the scrub switch forward (All LEDs will turn on) then turn o the key switch.

• 1 blink = Not equipped with on-board charger

• 2 blinks = On-board charger with WET 25A baeries (Use with 242 AH WET Baeries 56206079 or 310 AH WET

Baeries 56391391)

Loading ...

Nilfisk SC800 Heavy-Duty Cleaning

User Manual - Page 29