Loading ...
Loading ...
Loading ...
Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 137
Squeegee System
Functional Description
The squeegee collects the water so that the recovery system vacuum can suck it up o the oor and store it in the recov-
ery tank. The squeegee support is spring loaded downward to push the squeegee against the oor, and has a pivot point
that allows the squeegee to “swing” around corners. The squeegee tool rides along the oor on two small wheels and
is raised and lowered with a hand operated lever. To prevent damage to the squeegee tool in the event that the tool is
caught by an obstacle, it is mounted to the support frame in sloed holes and is fastened by two hand ghtened “wing
nuts”. The squeegee angle can be adjusted for opmum oor wiping. The squeegee tool has a front and a rear blade.
Each blade has 4 working edges that can be used before the blade is replaced. The front squeegee blade has slots along
the boom edge to allow the necessary air ow to carry the water. The rear squeegee blade edge is at.
Component Locations
• Squeegee Support
• Squeegee Tool
• Squeegee Li Lever
• Break Away Slots
• Tilt Adjustment Knob
Loading ...
Loading ...
Loading ...