Loading ...
Loading ...
Loading ...
Printer Properties
10
"Paper" Tab Settings (part 2)
Paper Size
Select an appropriate paper size for your document from drop-
down list.
Paper Selection
Select "Tray" or "Bypass" for your print job.
Tray
Paper is fed to the printer from the paper tray.
Bypass
Paper will be fed to the printer from the bypass tray. Only one
sheet can be loaded into the bypass tray. To load paper into the
bypass, align the paper with the right side of the bypass.
When printing one page:
Select "Bypass" for "Paper Selection" setting and send the print
job. "Please set a sheet of paper on bypass and press the START
button" message will appear on the print status window.
After confirming the messages, open the bypass tray to set the
paper and then press the START button ( ) on the unit.
When printing more than one page:
The message described above will also appear when printing of
the first page has completed. Load the paper again for the next
page, and then press the START button ( ). Repeat this
process for each page.
! The document size must be smaller than the selected
(loaded) paper. If not, printing will occur over the edge of
the paper causing the machine to become internally dirty.
! Ledger, A3, or B4 sized paper can not be loaded in this
printer. The print image should be reduced by the "Fit To
Paper Size" or "Zoom[%]" setting.
"N-Up Printing", "Fit To Page", and "Zoom[%]" settings are
not available when you select "COM10", "DL", "C6",
"Invitation A2", "Japanese Hagaki", "Banner Letter", or
"Banner A4" sized paper.
Size
8.5" x 11"
8.5" x 14"
7.25" x 10.5"
210mm x 297mm
148mm x 210mm
8.5" x 11"
210mm x 297mm
4.125" x 9.5"
4.375" x 5.75"
110mm x 220mm
114mm x 162mm
3" x 5"
4" x 6"
5" x 8"
105mm x 148mm
100mm x 148mm
Min. : 76.2mm x 127.0mm (3.00" x 5.00")
Max. : 297.0mm x 431.8mm (11.69" x 17.00")
Paper
Letter
11" x 17"
Ledger
Legal
Executive
297mm x 420mmA3
A4
A5
257mm x 364mmB4
182mm x 257mmB5
Banner Letter
Banner A4
COM10
Invitation A2
DL
C6
Index card 3" x 5"
Index card 4" x 6"
Index card 5" x 8"
A6
Japanese Hagaki
Custom
Make sure to insert "Banner Letter" and "Banner A4"
through the bypass tray. Max. 5 sheets of banner paper can
be set to the bypass tray. Make sure that your application
supports Banners when you intend to print onto Banners.
Loading ...
Loading ...
Loading ...