Loading ...
Loading ...
Loading ...
Self-help
deactivated. If the vehicle has no power
supply or ther
e is an electric system fault,
the engine must be jump-started
›››
page 52 to deactivate the electronic
parking brake and the electronic lock of the
steering column.
Front towline anchorage
Fig. 45 On the right side of the front bumper:
r
emove the cover.
Fig. 46 On the right side of the front bumper:
t
owline anchorage in position.
The housing of the removable towline an-
chor
age is on the right side of the front bump-
er underneath a cover
›››
Fig. 45.
The towing eye should always be kept in the
vehicle.
Bear in mind the instructions for towing
›››
page 55.
Fitting the towline anchorage
●
Remove the towing eye from the vehicle
tool kit in the luggage compartment
›››
page 43.
●
Remove the cover by pressing down on its
base and leave it hanging from the vehicle
›››
Fig. 45.
●
Screw the towing eye in the housing by
turning it as far as it will go anticlock-
wise
›››
Fig. 46
›››
. Use a suitable object
that can completely and securely tighten the
t
owing eye in its housing.
●
After towing, unscrew the towing eye
clockwise with a suitable object.
●
Insert the upper flange of the lid into the
opening of the bumper and press the lower
side of the lid until it is inserted into the bump-
er.
●
Clean the towing eye if necessary and then
store it in the luggage compartment along
with the other vehicle tools.
CAUTION
The towing eye must always be completely
and firmly tight
ened. Otherwise, it could be
released while towing and tow-starting.
57
Loading ...
Loading ...
Loading ...