Loading ...
Loading ...
Loading ...
Towing bracket device
WARNING
The enhanced safety provided by the elec-
tric st
ability control of the vehicle and trail-
er should not lead you to take any risks that
could compromise your safety.
●
Adapt your speed and driving style at all
times to suit visibility, weather, road and
traffic conditions.
●
Accelerate with caution when the road is
slippery.
●
When adjusting any settings, stop accel-
erating.
WARNING
The electric stability control for the vehicle
and tr
ailer may not correctly detect all
driving conditions.
●
When the ESC is switched off, the stabili-
sation of the towing vehicle and trailer is al-
so switched off.
●
The stability system does not always de-
tect light trailers, so it may not stabilise
these correctly.
●
When driving on surfaces with poor grip,
the trailer can even interfere with the sta-
bility system.
●
Trailers with a high centre of gravity can
tip over without having previously weaved.
●
If a trailer is not attached, but a connec-
tor is plugged into the power socket (e.g.
installation of a bicycle rack with lights),
repeated automatic braking may occur in
e
xtreme driving conditions.
Electrically unlocking trailer
hook
Description
Fig. 221
On the right side of the luggage com-
partment: butt
on for unlocking the tow hook.
The towing bracket’s hook is located in the
bumper
. Tow hooks for electrical unlocking
cannot be removed.
There should be no person, animal or object
in the path of the tow hook
›››
.
Unl
ocking the tow hook and removing it
●
Stop the vehicle and connect the electronic
parking brake
›››
page 275.
●
Switch off the engine.
●
Open the rear lid.
●
Pull the
›››
Fig. 221 button briefly. The tow
hook unlocks electrically and automatically
turns outwards. The button's control lamp
flashes.
●
Finish remove the tow hook by hand until
you feel and hear that it has engaged and
the control lamp on the button stays on.
●
Close the rear lid.
●
Hitching and connecting a trailer
›››
page 309.
Retracting the tow hook
●
Stop the vehicle and apply the electronic
parking brake.
●
Switch off the engine.
●
Unhook the trailer and interrupt the electri-
cal connection between it and the vehicle. If
you are using an adapter, remove it from the
trailer's power socket.
●
Open the rear lid.
●
Pull the
›››
Fig. 221 button briefly. The tow
hook unlocks electrically.
●
Turn the tow hook under the bumper with
your hand until you feel and hear that it en-
gages and the control lamp on the button re-
mains on continuously.
●
Close the rear lid.
»
313
Loading ...
Loading ...
Loading ...