Loading ...
Loading ...
Loading ...
Driving
Note
●
The driv
er message Inertia is only dis-
played with the current consumption. In in-
ertia mode the gear will no longer be dis-
played (for example “D” or “E” will appear
instead of “D7” or “E7”).
●
The operation of the inertia mode in com-
bination with hybrid engines can cause the
combustion engine to switch off.
●
The inertia mode will be automatically
disconnected on gradients steeper than
15%.
Indications on the instrument panel
displ
ay
Clutch
Clutch overheating! Please stop!
●
The clutch has overheated and could be
damaged. St
op and wait for the gearbox to
cool with the engine at idling speed and the
selector lever in position P. When the warning
lamp and the driver message switch off, have
the fault corrected by a specialised work-
shop without delay. If they do not turn off, do
not continue driving. Seek specialist assis-
tance.
Faults in the gearbox
Gearbox: Fault! Stop the vehicle
and place the lever in the position
P.
●
There is a fault in the gearbox. Stop the ve-
hicle in a safe place and do not continue driv-
ing. Seek specialist assistance.
Gearbox: System fault! You may
continue driving.
●
Have the fault corrected by a specialised
workshop without delay.
Gearbox: System fault! You can
continue driving with restrictions.
Reverse gear disabled
●
Take the vehicle to a specialised workshop
and have the fault repaired.
Gearbox: System fault! You can
continue driving in D until switch-
ing off the engine
●
Park the vehicle in a safe place. Seek spe-
cialist assistance.
Gearbox: too hot. Adapt your
driving accordingly
●
Continue driving at moderate speeds.
When the warning lamp switches off, you can
continue driving in a normal manner.
Gearbox: press the brake and en-
gage a gear again.
●
If the warning was caused by the tempera-
ture of the gearbox, this driver message will
be displayed when the gearbox has cooled
again.
Manual release of the selector lev-
er
Fig. 172 Gear selector lever: manual release
fr
om the parking position.
In the event of a power failure when starting
(e
.g. discharged battery), the lever will remain
locked in position P. To move it to position N to
move the vehicle, there is an emergency re-
lease device under the centre console, on the
right side. Releasing the selector lever re-
quires a certain degree of practical skill.
236
Loading ...
Loading ...
Loading ...