Loading ...
Loading ...
Loading ...
Driving
ignition is switched off or the vehicle is switch-
ed t
o Hybrid mode or E-MODE.
Press the function button and use the sym-
bols ,
=
and to control the battery charge:
Pressing this symbol selects a higher
theoretical charge level. The vehicle
tries to reach that new theoretical high-
voltage battery charge level while driv-
ing. The vehicle is powered by the com-
bustion engine. If the combustion engine
has “excess” power, it is used to charge
the high-voltage battery. This option in-
creases fuel consumption. SEAT there-
fore recommends using the charging
socket to charge the high-voltage bat-
tery, whenever possible
›››
page 320 .
The high-voltage battery charge level is
kept at around the current level while
driving. If you accelerate harder or in-
crease the vehicle speed, the combus-
tion engine starts up. When permitted by
the driver’s demand for acceleration and
the vehicle speed, the vehicle switches
back to electric mode.
Pressing this symbol selects a lower the-
oretical charge level. The vehicle only
uses the battery's charge when it is
above the selected theoretical charge
level. The rest is kept until the end of the
journey.
=
Show the active operating mode
The operating mode active at any given time
is displayed on the instrument cluster display,
e.g. .
WARNING
Switching to a different operating mode
whil
e driving can distract you from traffic
conditions and cause accidents.
Note
Information about the operating mode that
is curr
ently active is displayed on the in-
strument cluster display, along with the
charge level of the high-voltage battery.
Troubleshooting
The E-MODE oper
ating mode is not
available
The indicator lamp lights up in white.
The E-MODE operating mode
(driving in
electric mode) cannot be used temporarily
because one or more conditions are not met.
●
The conditions must be met to use the E-
MODE oper
ating mode
›››
page 225.
Start-Stop system
Control lamps
It lights up
The Start-Stop system is available, the automatic en-
gine shutdown is active.
It lights up
The Start-Stop system is not available or has been
disconnect
ed.
Instructions for the driver on the instru-
ment panel displ
ay
Start-Stop system deactivated. Start
the engine manually
●
This indication for the driver shows that the
Start-Stop system cannot start the engine
again.
Start-Stop system: Fault! Function
not available
●
There is a fault in the Start-Stop system.
Take the vehicle to a workshop to have the
fault repaired.
Description and operation
The Start-Stop system helps you to save fuel
and r
educe CO
2
emissions.
226
Loading ...
Loading ...
Loading ...