Loading ...
Loading ...
Loading ...
Driver assistance systems
The limiter is reactivated automatically after
r
eturning to less than the set speed.
Status display
When the speed limiter is switched on, the in-
strument cluster display shows the saved
speed and the system status:
It lights up grey
The speed limiter is switched on but regulation is not
activ
e.
It lights up green
The speed limiter is switched on and active.
Driving down slopes
1)
Shift int
o a low gear before descending a
long hill. This makes use of engine braking
and relieves the brakes.
WARNING
After use, always switch off the speed limit-
er t
o prevent the speed being regulated
against your wishes.
●
The speed limiter does not relieve the
driver of their responsibility to drive at the
appropriate speed. Do not drive at high
speed if not necessary.
●
Using the speed limit
er under adverse
weather conditions is dangerous and can
cause serious accidents, e.g. aquaplaning,
snow, ice, leaves, etc. Only use the speed
limiter when the status of the road and the
weather conditions allow it.
Operating the speed limiter
Fig. 182 On the multifunction steering wheel:
butt
ons to operate the speed limiter.
Connecting
●
Press the butt
on.
It does not take effect yet.
Start regulation
●
When the vehicle is moving, press the but-
ton .
The current speed is saved as a limit speed.
Adjusting the speed
The programmed speed can be set:
+ 1 km/h (1 mph)
- 1 km/h (1 mph)
+ 10 km/h (5 mph)
- 10 km/h (5 mph)
Interrupting the adjustment
●
Press the button.
The speed is stored.
Reinstating the cruise control
●
Press the button.
The limiter will re-activate as soon as the ve-
hicle is moving at a speed lower than the
saved one.
Switching off
●
Press and hold the button .
»
1)
Valid for hybrid vehicles
251
Loading ...
Loading ...
Loading ...