Loading ...
Loading ...
Loading ...
Towing bracket device
Retrofitting a towing bracket
Description
Fig. 222
Limits and attachment points for ret-
r
ofitting a towing bracket.
SEAT recommends that towing brackets be
r
etrofitted at a specialised workshop. For ex-
ample, it may very well be necessary to ad-
just the cooling system or mount thermal pro-
tection plates. SEAT recommends visiting a
SEAT dealership for this.
If a towing bracket is retrofitted, the distance
specifications should always be kept in mind.
The distance between the centre of the ball
head and the road
›››
Fig. 222
D
must never
be l
ess than indicated. This also applies when
the vehicle is fully loaded, including the tech-
nically permissible maximum vertical load on
the coupling device.
Distance specifications
›››
Fig. 222:
Mounting points on the vehicle
1,095 mm
75 mm (minimum)
365 mm
353 mm
600 mm
1,050 mm
WARNING
If the cables are improperly or incorrectly
connect
ed, this may lead to malfunctions
in the entire vehicle electronic system, as
well as to accidents and serious injuries.
●
Never connect the trailer's electric sys-
tem to the electrical connections of the tail
lights or any other unsuitable power sour-
A
B
C
D
E
F
G
ces. Only use suitable connectors to con-
nect the tr
ailer.
●
The towing bracket should be retrofitted
only at a specialised workshop.
WARNING
If the towing bracket is badly fitted or un-
suit
able, the trailer may separate from the
vehicle while driving. This could cause seri-
ous accidents and fatal injuries.
Note
●
Only use t
owing brackets that have been
approved by SEAT for the model in ques-
tion.
●
In some versions, the fitting of a conven-
tional towing hook solution is not recom-
mended. Please consult your Technical
Service.
315
Loading ...
Loading ...
Loading ...