Loading ...
Loading ...
Loading ...
Operation
Using the net partition
Fig. 133
Net partition fitted.
The purpose of the net partition is to prevent
the it
ems in the boot from moving into the
cabin, e.g. in the event of sudden braking.
Fitting the net partition
The partition net can be fitted behind the rear
seat or, depending on the features, behind
the front seats with the second row of seats
lowered.
●
If required, remove the rear shelf
›››
page 140.
●
Folding out the net partition
›››
page 147.
●
Secure the net partition in the left housing
of the roof
›››
Fig. 133
A
. Make sure to move
the cr
oss rod down beyond the upper posi-
tion.
●
Hook in the net partition on the rear right-
hand side roof housing by pressing on the rod
›››
Fig. 133
A
.
●
Secure two hooks of the partition net to the
f
astening rings of the boot
›››
Fig. 133
B
and
tight
en the straps firmly.
Removing the net partition
●
If required, remove the rear shelf
›››
page 140.
●
Loosen the straps from the net partition.
●
Release the net hooks from the fastening
rings
›››
Fig. 133
B
.
●
Unhook the net partition on the right-hand
side r
oof support
›››
Fig. 133
A
by pressing
on the r
od.
●
Unhook the net partition from the left-hand
side roof housing.
●
Fold in the net partition
›››
page 147.
●
If required, fit the rear shelf
›››
page 140.
WARNING
In order to ensure the proper functioning of
the luggage r
estraint systems (backrests
together with the net partition), place the
second row of seats in their rearmost posi-
tion to avoid the possibility of the load on
top moving forward. Risk to vehicle occu-
pants.
WARNING
During a sudden driving or braking ma-
noeuvr
e, or in the event of an accident, ob-
jects could be flung though the interior and
cause serious or fatal injuries.
●
Check whether the cross rods are cor-
rectly engaged.
●
Always secure objects, even when the
net partition is properly assembled.
●
There should be nobody behind the net
partition when the vehicle is moving.
CAUTION
If the net partition is secured incorrectly or
t
o incorrect points, this may damage the
vehicle.
Roof carrier
Intr
oduction
The vehicle roof has been designed to opti-
mise aer
odynamics. For this reason, cross
bars or conventional roof carrier systems
cannot be secured to the roof water drains.
As the roof water drains are integrated in the
roof to reduce air resistance, only SEAT-ap-
proved cross bars and roof carrier systems
can be used.
148
Loading ...
Loading ...
Loading ...