Loading ...
Loading ...
Loading ...
High-voltage battery
●
Ne
ver charge the vehicle in potentially
explosive atmospheres. The components of
the charging cable can cause sparks and,
therefore, may ignite flammable or explo-
sive vapours.
●
Never use damaged charging connectors
or cables. Before each use, check that the
connector and charging cable are not
damaged.
●
Never use the charging cable with an ex-
tension lead, rolled cable, power strip or
adapter, e.g. adapter for other countries or
timer.
●
Always protect the connectors to prevent
water, moisture and other liquids from di-
rectly getting inside.
●
For safety reasons, no other work should
be performed on the vehicle while it is
charging.
●
Always end the charging process before
unplugging the mains connector. Other-
wise the charging cable and the electrical
installation may also be damaged.
●
Never charge several vehicles simultane-
ously from electrical sockets of the same
safety circuit. Use a different safety circuit
to charge additional vehicles. Always
check the maximum current or power of the
safety circuit that is used. If necessary,
seek advice from qualified electrical instal-
lation professionals.
●
Only use the charging cables supplied
with the vehicle or the charging station ca-
ble. If the cable needs to be replaced, it is
r
ecommended to exclusively use SEAT
charging cables.
●
Never make changes or repairs to electri-
cal components, particularly the high volt-
age system.
●
Always unplug the charging cable before
starting the vehicle. Place the protective
caps and close the cover of the battery
charging socket.
Note
●
The high-v
oltage battery can only be
charged at charging stations that meet the
following requirements and regulations:
–
IEC 61851 and IEC 62196 (type 2 con-
nector).
●
Very low or very high temperatures can
noticeably reduce the high voltage bat-
tery’s charging power.
●
To avoid possible compatibility problems
with charging infrastructures, SEAT recom-
mends the use of cables and home charg-
ing stations recommended by the Volkswa-
gen Group.
●
For charging with alternating current,
SEAT recommends charging the high-volt-
age battery at maximum charging power
from a fixed charging station or Wallbox.
This achieves greater efficiency when
compared to charging from an electrical
socket.
●
Check the t
echnical information about
your vehicle’s charging capacity. You can
get more information from any SEAT dealer.
Identification of compatible charg-
ing infr
astructure
3 V
alid for: hybrid vehicles
Fig. 226 Identification of alternating current
(AC) and t
ype 2 connector.
Fig. 227
Identification of direct current (DC)
and the v
ehicle's CCS connector
Compatibility between vehicles and
char
ging infrastructure
The following indicators according to DIN EN
17186 report whether the infrastructure's
»
321
Loading ...
Loading ...
Loading ...