Loading ...
Loading ...
Loading ...
Operation
Fig. 125
In the luggage compartment: adjust
the height of the v
ariable luggage compart-
ment floor.
Open boot floor
●
Grab the boot floor by the opening
›
››
Fig. 124 and lift it in the direction of the ar-
row. Secure the belt to the rubber gasket
(small arrow).
Close boot floor
●
Loosen the belt and secure it to the support
under the boot floor. Move the floor down
carefully and let it go
›››
.
Adjust the height of the variable boot floor
Depending on the f
eatures, the height of the
boot floor can be adjusted.
●
If necessary, release the net bag
›››
page 145 and, if necessary, remove the
belts.
●
Lift the boot floor and pull it backwards to
release it from the side guides of the boot
›››
Fig. 125 .
●
Place the floor on the guides of the desired
height and move it forwards
›››
Fig. 125 .
CAUTION
●
Do not t
ug the boot floor suddenly when
opening or let it fall down when closing.
Otherwise, the lining and the floor of the
boot could be damaged.
●
The maximum weight that can be loaded
on the luggage compartment variable floor
in the top position is 125 kg.
Note
●
Depending on the f
eatures, there are
storage compartments for small objects
under the boot floor.
●
SEAT recommends the use of fastening
straps to secure objects to retaining rings.
Luggage compartment floor (7-
seat
er vehicles)
Fig. 126
In the luggage compartment: lift the
luggage compartment fl
oor.
Open boot floor
●
Grab the boot floor by the cord
›
››
Fig. 126
and lift it in the direction of the arrow and re-
move it.
Close boot floor
●
Place the boot floor on the support and
carefully lower it
›››
.
CAUTION
●
Do not l
et the luggage compartment
floor fall when closing it. Always carefully
guide it downward in a controlled manner.
Otherwise, the lining and the floor of the
boot could be damaged.
144
Loading ...
Loading ...
Loading ...